The paint has been prepared and can be used directly.
1. Prepare a water container. The water capacity should be higher and wider than the materials required for bleaching and dyeing.
2. Shake the bottle back and forth evenly before use to make the color powder at the bottom fully dissolved in the paint.
3. Choose your favorite color and drop it into the water surface. Use a drawing needle to stir it into the desired pattern. Then insert the round fan that needs to be bleached and dyed into the water. The fan should be placed in the water for as long as possible within 3~5s. Do not immerse the fan in water for a long time.
4. After the fan is bleached and painted, do not expose it to the sun. Place the fan flat on the table and use a dry paper towel to absorb the water and then dry it in the shade.
5. If you change the color, the excess paint on the water surface can be absorbed by putting a paper towel into the water, and then
add a new color to the water and repeat the above steps.
6. The round fans we sell are all made of white cardboard, not inferior foam board and gray cardboard.
The quality is guaranteed, but there are also cracking problems caused by operating methods and long water time. Use a household electric iron to iron and restore it.
7. Please wear a mask and disposable gloves when operating to avoid paint splashing onto clothes and skin, which will be difficult to clean and may cause allergies! Be careful when operating.